Menu sản phẩm
Hãng sản xuất
Hổ trợ trực tuyến
|
|
|
| Ms Liên | |
 lien.ans@ansvietnam.com
|
|
 0902.937.088
|
|
|
|
|
| Mr. Hương | |
|
huong@ansgroup.asia
|
|
|
0984 359 334
|
|
Lượt truy cập
|
Đang online | 4 |
|
Lượt truy cập | 317556 |
ESM303 Motorized Test Stands With PC Control
Loại sản phẩm: Motorized Test Stands Mark 10 Vietnam
Mã sản phẩm: ESM303
Nhà cung cấp: Anh Nghi Son
Xuất Xứ:
Hãng sản xuất: Mark-10
Giá : Vui lòng liên hệ
| tester for tension and compression measurement applications up to 300 lbF (1.5 kN), with a rugged design suitable for laboratory and production environments." style="text-decoration: none;">  |
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
|
||
 |
|
 |
 |
Data collection & motion control software Note: MESUR™gauge Plus does not require any optional test stand functions, such as PC Control. If force vs. travel vs. time output is required, order the Travel Indication option. See below section for details. |
|
 |
A wide range of force gauges and gripping fixtures | |
 |
Interface cable, gauge to test stand Connects Series 7, 5 and Series 4 force gauges to the crosshead. This single cable is used to transmit data and power. The gauge's AC adapter is not required. |
|
 |
USB cable, test stand to PC (09-1158) For force and travel data output and PC control. |
|
 |
Load cell / indicator adapter (AC1062) Accommodates any Mark-10 indicator and Series R01 or R03 force sensors. Includes mounting hardware. |
|
 |
Load cell hardware kit Set of mounting hardware to mount any Series R01 load cell up to 2,000 lbF capacity and any Series R03 force sensor. Can also be adapted to other manufacturers' load cells with #10-32, 1/4-28, and 1/2-20 mounting threads. Note that Series R01 and R03 load cell part numbers ending in -1 (ex: MR01-500-1) include mounting hardware for an ESM303. |
|
 |
Single column extensions (ESM303-001-1 / -2 / -3) Three lengths are available - 6, 12 and 24 in [150, 300, and 600 mm]. |
|
 |
Double column extensions (ESM303-002-1 / -2 / -3) Accommodate up to a 20 in. [508 mm] wide sample, or ø21.5 in [ø546 mm] round sample. Three heights are available - 6, 12 and 24 in [150, 300, and 600 mm]. Base contains rows of T-slots for fixture mounting. |
|
 |
Eye end adapters Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges. |
|
 |
|
Any of the below functions may be purchased at time of order or may be enabled in the field at a later date though a code activation process. The only exception is the AF009 travel measurement option, which also requires field hardware installation. A complete options package is also available, including all of the below features at a discounted price. The test stand is shipped in Demo Mode, during which time all available features are temporarily enabled for 160 hours of operation. |
||||
| Feature | Part No. | Description | |
Requirements |
| FollowMe™ | AF008 | Crosshead movement responds to manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning. |
|
|
| Travel indication | AF009 | Travel is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated. |
|
|
| Computer control | AF010 |
The ESM303 may be fully controlled by a PC through a custom-written program in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10). This option is not required for MESUR™gauge Plus software. |
|
|
| Programmable travel limits | AF011 | The stand stops at or cycles between programmable upper and lower travel distances. |
|
|
| Overload protection | AF012 | Protects a force gauge or force sensor against overload. Program the desired percentage of full scale of the gauge. Adjustable analog voltage setting allows the stand to interface with virtually any gauge with analog output. |
|
|
| Auto return | AF013 | The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit. |
|
|
| Cycling / dwell time | AF014 | Same as auto return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds. |
|
|
| Independent Up and Down speeds | AF016 | Configurable speeds for up and down directions. |
- |
|
| Low speed extension | AF017 | Extends the standard speed range down to 0.02 in/min (0.5 mm/min). |
- |
|
| High speed extension | AF018 | Extends the standard speed range up to 45 in/min (1,100 mm/min). |
- |
|
| Break detection | AF019 | Crosshead stops at a sudden drop in force. Programmable percentage of peak force. |
|
|
| Loadholding | AF020 | Dynamically adjusts the crosshead position to maintain a programmed load for an indefinite or specified period of time. |
|
|
| Preload / sample touch | AF021 | Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, compression, spring, elongation, and other applications. Preload is programmable as a percentage of force gauge/load cell full scale. Three modes: (1) stop, (2) stop and zero, and (3) zero without stopping. |
|
|
| Profiles | AF022 | Save and recall sets of test parameters, such as speeds, travel limits, preloads, etc. Up to 50 profiles may be stored. | - | |
| Complete options package | AFCOMP | Includes all functions listed above, plus 09-1214 interface cable and 09-1158 USB cable. Requires a Series 7 or 5 gauge or indicator with load cell. |
||
 |
 |
The ESM303 test stand is shipped as shown at left, and includes the following accessories: (1) G1024 extension rod, 2” |
 |
| Load capacity: |  |
300 lbF (1.5 kN) @ up to 24 in/min (610 mm/min) 200 lbF (1 kN) @ >24 in/min (610 mm/min) |
| Maximum travel distance: | 18.0 in (457 mm) | |
| Speed range: | Standard: 0.5 - 13 in/min (13 - 330 mm/min) Optional: 0.02 - 45 in/min (0.5 - 1,100 mm/min) |
|
| Speed setting accuracy: | ±0.2% of setting | |
| Speed variation with load: | ±0% (stepper motor driven) | |
| Travel accuracy*: | ±0.002 in. per 10 in. (±0.05 mm per 250 mm) | |
| Travel resolution: | 0.001 in / 0.02 mm | |
| Limit switch repeatability: | 0.001 in (0.03 mm) | |
| Power: | Universal input 80-240 VAC, 50/60 Hz | |
| Weight: | 56.5 lb (25.6 kg) | |
| Warranty: | 3 years [see individual statement for further details] | |
| * Because load cell deflection and system deflection are present and not automatically compensated for, this equipment is recommended for applications requiring at least 0.2 in [5 mm] of travel distance. | ||
 |
| Hardware | ||
| Model/Part No. | Description | US Price |
| ESM303 | Motorized test stand,110V* | $2,895.00 |
| ESM303-001-1 | Single column extension for ESM303, 6" | $575.00 |
| ESM303-001-2 | Single column extension for ESM303, 12" | $675.00 |
| ESM303-001-3 | Single column extension for ESM303, 24" | $875.00 |
| ESM303-002-1 | Double column extension for ESM303, 6" | $2,200.00 |
| ESM303-002-2 | Double column extension for ESM303, 12" | $2,350.00 |
| ESM303-002-3 | Double column extension for ESM303, 24" | $2,600.00 |
| 09-1214 | Test stand-gauge interface cable | $125.00 |
| 09-1158 | USB cable | $30.00 |
| AC1062 | Load cell / indicator mounting kit for ESM303 | $225.00 |
| AC1064 | Load cell hardware kit for ESM303 | $50.00 |
| 09-1089-1 | Power cord, 110V US (included with ESM303) | $30.00 |
| 09-1089-2 | Power cord, 220V EUR (included with ESM303E) | $30.00 |
| 09-1089-3 | Power cord, 220V UK (included with ESM303U) | $30.00 |
| 09-1089-4 | Power cord, 220V AUS (included with ESM303A) | $30.00 |
| Controller Options | ||
| AF008 | FollowMe™ | $250.00 |
| AF009 | Travel measurement | $950.00 |
| AF010 | PC control | $950.00 |
| AF011 | Travel limits | $250.00 |
| AF012 | Overload protection | $250.00 |
| AF013 | Auto return | $175.00 |
| AF014 | Cycling | $250.00 |
| AF016 | Independent up/down speeds | $150.00 |
| AF017 | Low speed range extension | $175.00 |
| AF018 | High speed range extension | $175.00 |
| AF019 | Break detection | $175.00 |
| AF020 | Load holding | $400.00 |
| AF021 | Preload | $250.00 |
| AF022 | Save multiple profiles | $500.00 |
| AFCOMP | Complete options package | $3,650.00 |
|
* ESM303 contains a universal power supply (80 - 240V) and includes a power cord with US plug. Add suffix ‘E’ for Euro plug, ‘U’ for UK plug, or ‘A’ for Australian plug. Ex: ESM303E Power cords also available for purchase individually. |
||
 |
 |
Xem thêm các sản phẩm
