ESM301/ESM301L Motorized Test Stands With PC Control

Loại sản phẩm: Motorized Test Stands Mark 10 Vietnam

Mã sản phẩm: ESM301/ESM301L

Nhà cung cấp: Anh Nghi Son

Xuất Xứ:

Hãng sản xuất: Mark-10

Giá : Vui lòng liên hệ

The ESM301 and extended length ESM301L are highly configurable motorized test stands for tension and compression testing applications up to 300 lbF (1.5 kN) for laboratory and production environments.

The stands can perform a wide range of tests, including break testing, cycling, limit testing to a load or distance, load holding, elongation testing, tensile testing, compression testing, and more. Satisfy various test methods through an easy-to-use menu, allowing the configuration of test speed, force and distance limits, cycling, preload, and many other functions. The stands can be controlled via its console or PC.

Functions are offered individually through a unique "build-your-own" configuration platform. Order any combination of functions to customize the stand to specific requirements. Functions not ordered originally can be activated in the field.

A password can be set to protect against unauthorized changes. Modular mechanical design allows the test frame and controller to be separated for various mounting configurations.

 

 
   
Data Sheet  
User's Guide  
       

Use MESURgauge Software to tabulate, graph, and analyze test data (More info)

Gallery Hardware Options Specifications Dimensions
Features   Optional Functions   Ordering Information    
 
 

 
gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail    
                               
 
gallery thumbnail    
                               
 
gallery thumbnail gallery thumbnail            
                               

 
  • Selectable speed units of measurement (in/min & mm/min)
  • LCD display with UP, DOWN, STOP, and emergency stop buttons and variable function keys
  • Password protection of test parameters, to prevent unauthorized changes
  • Integrated travel limit switches
  • Removable fixture mounting plate with matrix of threaded holes
  • Stepper motor-driven, produces 0% speed variation with load
  • Mounting holes for bench mounting
  • Unique mechanical design significantly reduces column bending
  • Programmable UP and DOWN button functions - momentary motion, maintained motion, or auto

 
  • A wide range of force gauges and gripping fixtures
  • Multi-function cables, gauge to controller (09-1162)
    Connects Series 7, 5 and Series 4 force gauges to the controller. This single cable is used to transmit set points, overload signals, and force data.
  • Serial cable, controller to PC (09-1056) 
    Sends force and travel data on a single cable via RS-232 to a PC.
  • RS-232 to USB adapter (RSU100)
  • Bench mounting kit (ESM301-003) 
    Consists of a set of mounting adapters, and four sets of hardware with Allen key to accommodate surfaces of various thickness. Recommended when ordering column extensions.
  • Column extensions (ESM301-002-1, -2, -3) 
    A spacer is supplied between the base and the column, increasing clearance between the force gauge and base (does not increase travel distance). Available in 6" (150 mm), 12" (300 mm), and 24" (610 mm), and custom lengths. Bench mounting kit is recommended
  • Frame-Controller connection cables (09-1137, -1, -2, -3) 
    Permit the removal of test frame from controller for alternative mounting configurations.
  • Competitor force gauge mounting kits
  • Eye end adapters
    Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges

 

Most of the below functions may be purchased at time of order or may be enabled in the field at a later date though a simple activation process. A complete options package is also available, including all of the below features at a discounted price. The stands are shipped in Demo Mode, during which time all available features are enabled for 160 hours of operation.

       
Feature Part No. Description Requirements
Travel indication ESM301-001
ESM301L-001
Travel is indicated on the front panel, and an RS-232 port is supplied. Position indication is provided via an internal linear scale, producing significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated.
  • Order upfront, not field installable
Computer 
control
EF010 A bi-directional RS-232 port is provided to interface with a PC. Users can write a custom program utilizing a library of ASCII commands or control the stand via a PC using legacy Nexygen TCD software (not available from Mark-10).
  • Series 5 or 7 force gauge
  • 09-1056 serial cable
  • 09-1162 cable
  • ESM301(L)-001 integrated travel indication
  • EF011 programmable travel set points
Programmable
travel limits
EF011 The ESM301 can stop at or cycle between programmable upper and lower travel distances.
  • ESM301-001 or 
    ESM301L-001 travel indication option
Overload 
protection
EF012 Protects a force gauge against overload. Program the desired percentage of full scale of the gauge. Adjustable analog output voltage setting allows the ESM301 to interface with virtually any gauge with analog output.
  • Series 7, 5 or 4 force gauge
  • 09-1162 cable
Auto Return EF013 The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the other limit.
  • Reversing at force set point: Series 7, 5 or 4 force gauge and 09-1162 cable
  • Reversing at travel limit: EF011 programmable travel limits option
  • Reversing at break: EF019 break detection option and 09-1162 cable
Cycling / dwell time EF014 Same as auto-return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds.
  • Same as auto-return. Requires EF016 for independent up and down speeds.
Independent Up 
and Down Speeds
EF016 Configurable speeds for up and down directions. -
Low Speed 
Extension
EF017 Extends the speed range to 
0.02 - 13 in/min (0.5 - 330 mm/min).
-
High Speed 
Extension
EF018 Extends the speed range to 
0.5 - 45 in/min (13 - 1100 mm/min).
-
Break Detection1 EF019 Crosshead stops at a sudden drop in force. Programmable 
percentage of peak force.
  • Series 7 or 5 
    force gauge2
  • 09-1162 cable
Load Holding1 EF020 Dynamically adjusts the crosshead position to maintain a 
programmed load for an indefinite or specified period of time.
  • Series 7 or 5 
    force gauge2
  • 09-1162
  • If a specified time is required, order EF014 cycling option
Preload / Sample Touch EF021 Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, compression, spring, elongation, and other applications. Preload is programmable as a percentage of
force gauge full scale. Three modes: (1) stop, (2) stop and zero, 
and (3) zero without stopping.
  • ESM301-001 or ESM301L-001 travel indication option
  • Series 7 or 5 force gauge2
  • 09-1162 cable
Complete Options Package Includes all Controller Features listed above
 

 
  • Load capacity: 
    300 lb (1.5 kN) @ up to 24 in/min (610 mm/min) 
    200 lb (1 kN) @ >24 in/min (610 mm/min)
  • Maximum travel distance: 
    ESM301: 11.5 in (292 mm) 
    ESM301L: 18 in (457 mm)
  • Speed range: 
    Standard: 0.5 - 13 in/min (13 - 330 mm/min) 
    Optional: 0.02 - 45 in/min (0.5 - 1100 mm/min)
  • Speed setting accuracy: ±0.2%
  • Speed variation with load: ±0% (stepper motor driven)
  • Travel accuracy*: ±0.002 in (0.05 mm)
  • Travel resolution: 0.001 in / 0.02 mm
  • Limit switch repeatability: 0.001 in (0.03 mm)
  • Power: Universal input 80-240 VAC, 50/60 Hz
  • Weight: 
    ESM301: 34 lb (15.4 kg) 
    ESM301L: 39.5 lb (23.7 kg)
  • Warranty: 3 years (see individual statement for further details)
  • CE mark
 
* Because load cell deflection and system deflection are present and not automatically compensated for, this equipment is recommended for applications requiring at least 0.2 in [5 mm] of travel distance.
 

     
Model/Part No. Description US Price
ESM3011 Motorized test stand, 110V1 $2,695.00
ESM301L1 Motorized test stand, 110V1 $2,995.00
ESM301-002-1 Column extension, 6" $275.00
ESM301-002-2 Column extension, 12" $325.00
ESM301-002-3 Column extension, 24" $375.00
ESM301-003 Bench mounting kit $75.00
09-11622 Multi-function cable, Series 7/5/4 gauge to ESM3012 $125.00
09-10562 Serial cable, ESM301 to RS-2322 $30.00
RSU100 Communication adapter, RS-232 to USB $125.00
09-1137 Connection cable, controller to test frame, 15" (included with stand) $45.00
09-1137-1 Connection cable, controller to test frame, 22" $45.00
09-1137-2 Connection cable, controller to test frame, 29" $45.00
09-1137-3 Connection cable, controller to test frame, 39" $45.00
 
Controller Options
ESM301-0013 Integrated travel indication with RS-232 outputfor ESM301 $750.00
ESM301L-0013 Integrated travel indication with RS-232 output3 for ESM301L $950.00
EF010 Computer control via RS-232 $950.00
EF011 Programmable travel set points $550.00
EF012 Integrated overload protection $250.00
EF013 Auto return $175.00
EF014 Cycling / dwell time $250.00
EF016 Independent up and down speeds $150.00
EF017 Extended speed range, low $175.00
EF018 Extended speed range, high $175.00
EF019 Break detection $175.00
EF020 Load holding $250.00
EF021 Preload / sample touch $250.00
EFCOMP Complete options package for ESM301 $2,995.00
EFCOMP-L Complete options package for ESM301L $3,145.00
EFCOMP and EFCOMP-L packages include all Controller Options listed above. 
Prices are in addition to the test stand price.

Notes:

  1. ESM301/ESM301L contains a universal power supply (80 - 240V) and includes a power cord with US plug. Add suffix ‘E’ for Euro plug, ‘U’ for UK plug, or 'A' for Australian plug. Ex: ESM301E, ESM301U, ESM301LA
  2. If force data output is required, and controller options requiring communication between the gauge and stand are ordered, both the 09-1162 and 09-1056 cables are required. If force vs. travel data output is required, both the above cables are also required. A USB converter is available. Compatible with Series 7/5/4 gauges (more info).
  3. Factory installation only. Can be retrofitted at a later date at the factory for $950.00 / $1,150.00 (ESM301 / ESM301L).

The ESM301/ESM301L is supplied with a small hook, medium hook, 2" diameter compression plate, extension rod, and #10-32 coupler.


 
   
 
 
 
       
Model A B (Series 3/2) C (Series 7/5/4)
ESM301 24.5 
[622]
3.5 - 15.0
[89 - 381]
2.3 - 13.8
[58 - 351]
ESM301L 31.5 
[800]
3.5 - 21.5
[89 - 546]
2.3 - 20.3
[58 - 516]

Sản phẩm liên quan

ESM303 Máy đo lực kéo - n ...

Máy đo lực kéo - nén Mark ...

Mark-10 Vietnam, ESM1500F ...

Máy kiểm tra lực nén ESM3 ...

Advanced Motorized Test S ...

ESM303H Motorized Test St ...

ESM1500 Motorized Test St ...

ESM303 Motorized Test Sta ...

Advanced Motorized Torque ...

Advanced Motorized Test S ...